&RPPLVVLRQLQJ
S7-300 Automation System, Hardware and Installation: CPU 31xC and CPU 31x
A5E00105492-03
9-19
0RQLWRULQJYDULDEOHV
You have two options for monitoring variables:
• updating the status values once via menu item 9DULDEOH!8SGDWHVWDWXV
YDOXHV
or
• continuous update of status values via menu item 9DULDEOH!0RQLWRU
&RQWUROOLQJYDULDEOHV
To control variables, proceed as follows:
1. Left-click the field &RQWUROYDOXH of the relevant variable.
2. Enter the control value according to the data type.
3. To update control values once, select the menu item 9DULDEOH!(QDEOH
FRQWUROYDOXHV.
or
Enable control values permanently via menu item 9DULDEOH!&RQWURO.
4. In the 0RQLWRU test function, verify the control value entry in the variable.
,VWKHFRQWUROYDOXHYDOLG"
You can disable the control value entered in the table. An invalid value is displayed
same as a comment. You can re-enable the control value.
Only valid control values can be enabled.
6HWWLQJWKHWULJJHUSRLQWV
7ULJJHUSRLQWV
• The "Trigger point for monitoring" determines the time of update for values of
variables to be monitored.
• The "Trigger point for controlling" determines the time for assigning the control
values to the variables to be controlled.
To Next Page
Loading...
Need help?
General
