34
en Display
■ Touch [ Continue ]. “Complete set-up?”
appears�
■ Touch [ Apply ]. The settings are saved�
The appliance is ready to use when the
drink symbols are shown on the display�
The integrated fan switches on each time
a drink is dispensed and switches o again
after a few minutes�
When the appliance is used for the rst time
after running a service program, or if it has
not been operated for a long period, the rst
beverage will not have the full aroma and
should not be consumed�
When the fully automatic coee machine
is rst used, a suitably thick and stable
“crema” is only achieved after the rst few
cups have been dispensed�
Switch o appliance
■ Press the I button�
The appliance rinses and switches to
energy saving mode�
Exception: If only hot water is dispensed,
the appliance switches o without rinsing .
■ To switch the appliance o completely,
open the appliance door and set the
mains switch to h�
F
Important: Do not press the mains
switch while the appliance is in use�
Switch off the appliance only when
it is in energy saving mode, so it can
rinse automatically�
The factory settings of the fully
automatic coffee machine are pro-
grammed for optimal performance�
The appliances switches automat-
ically to the energy saving mode
after a congured time and rinses
(duration can be set, see “Switch o
after” in the section “Menu”)�
The appliance is equipped with a
sensor� If there is a milk container,
this will be correspondingly shown
on the display when switching to the
energy saving mode� If there is milk
in the container, please keep in the
fridge�
Display
Information is shown on the display, or
settings can be made by touching the
touchscreen�
Display
The display shows the selected drinks,
settings and setting options, as well as mes-
sages about the appliance’s operating status�
Examples:
Drink selection
Adjust
Information
Information disappears after pressing the
button or after a short time�
Water tank almost empty
Instead of text, a small symbol appears in
the lower left area of the display�
a
Bean container almost empty
b
Water tank almost empty
c
Change water lter
d
Cleaning programme required
e
Descaling programme required
f
calc’nClean programme required