Siemens CT636LE 6 Series

48
en Home Connect
Home Connect
This fully automatic co󰀨ee machine is
Wi-Fi-capable and can be remotely con-
trolled using a mobile device (e�g� tablet PC,
smartphone). The Home Connect App o󰀨ers
additional functions which are a perfect
complement to the networked appliance�
If the appliance is not connected to the
WLAN network (home network), it functions
in the same way as a fully automatic co󰀨ee
machine with no network connection and can
be operated as usual via the display�
Important information:
The home network router must be operated
in the 2�4 GHz frequency range� Please
check it and adjust it if necessary�
The availability of the Home Connect func-
tion depends on the availability of Home
Connect services in your country� Home
Connect services are not available in every
country. You can nd more information on
this at www.home-connect.com�
F
Please ensure that you follow the
safety instructions given at the begin-
ning of this instruction manual and
that these are also observed when
operating the appliance via the Home
Connect App and when away from
home� Please also follow the instruc-
tions in the Home Connect App�
F
Operation on the appliance itself
always takes priority, and during this
time it is not possible to operate the
appliance using the Home Connect
App�
Setting up
To implement settings via Home Connect,
you must have installed the Home Connect
App on a mobile device (e�g� tablet PC,
smartphone)� Please observe the supplied
Home Connect documents with regard to
this. Follow the steps specied by the app
to implement the settings�
Login of the appliance in the WLAN network
can be carried out on initial set-up of the
fully automatic co󰀨ee machine either
directly or using the menu (rst press
A to open the menu):
■ Touch arrow key L repeatedly until the
display shows “Home Connect”.
■ Touch [ Home Connect Settings ].
■ Touch [ Wi-Fi Off ] to start the wireless
connection� “Wi-Fi On” appears in the
display�
■ Touch [ Connect network ]� The
following selection appears: [ Connect
automatically ] and [ Manually connect ]�
F
If the router has WPS function-
ality, please select [ Connect
automatically ]�
Connect automatically in the
WLAN network (home network)
■ Touch [ Connect automatically ]� The
display shows [ Automatic network
connection ]�
■ Press the WPS button on the home
network router within a few minutes and
wait until the display of the fully auto-
matic co󰀨ee machine shows “Network
connection successful”�
■ Open the app on the mobile device�
■ Touch [ Next ]�
■ Touch [ Connect with app ]� The fully
automatic co󰀨ee machine connects with
the app�
■ Wait until [ Successfully connected with
app ] lights up briey in the display.
■ Touch [ Remote start ]� A warning
message appears�
■ Touch [ Next ] and read the warning
message�
■ Touch [ confirm ]�
With the mobile device the functions of the
fully automatic co󰀨ee machine can now be
used to their full extent via the app�