Basic settings en
59
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing the basic set-
tings
1.
Press .
a The display shows the list of basic
settings.
2. Change the required basic setting.
a The appliance saves the basic set-
ting automatically.
3. To go back to the menu, press .
4. To exit the basic settings, press .
Tip:To call up brief information,
press .
14.2 Overview of the basic settings
You can find an overview of the basic settings here.
Language Set language.
HomeConnect HomeConnect assist-
ant
→"Setting up HomeConnect",
Page58
Time Set the current time or auto-
matically display via
HomeConnect.
Date Set current date or display
automatically via HomeCon-
nect.
Display settings Display brightness Set the brightness in steps.
Time display Switch the time display on
and off after the appliance has
been switched off.
Time Set the time display.
1
Depending on the appliance specifications
To Next Page
Loading...
Need help?
General
