Siemens DE06111 - Electrical Connection Guide; Connecting Fixed Electrical Models; Connecting Plug-in Ready Models; Venting the Continuous-Flow Heater

23
en
Electrical connection
DE05101, DE06101, DE06111, DE08101
and DE08111 (fixed electrical connection)
Connect the appliance on the terminal strip in ■
accordance with the connection schematic.
Put on the housing cover and push it onto the
■
rear wall of the appliance so that the upper and
lower latches engage.
DE04101 and DE10104
Replacing the Power Supply Cord:
The power supply cord must be replaced by our ■
customer service only in order to avoid a hazard.
The mains plug must be pulled before replacing.
For all appliances
Vent the continuous-flow heater: Fully open ■
the warm water tap and flush out the appliance
for about 1 minute (G), until bubbles no longer
emerge.
1 min
G
L
N
PE
E
2
E
1
F
1
F
2
X
1
DE 05101
DE 06101
DE 08101
DE 06111
DE 08111
L
N
PE
X
1
E
1
F
1
DE 04101
DE 10104