Need help?Do you have a question about the Siemens Drager medical Carina and is the answer not in the manual?
General| O2 Flush | Yes |
|---|---|
| Tidal Volume Range | 50 to 2000 ml |
| Respiratory Rate | 4 to 80 bpm |
| Inspiratory Time | 0.2-5.0 seconds |
| FiO2 | 21 to 100 % |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Fresh Gas Delivery | Integrated |
Describes ventilation modes like VC-SIMV, PC-BIPAP, PC-AC, SPN-PS, SPN-CPAP.
Describes buttons for »Audio paused 2 min.«, »Select Menu«, »Start/Standby«.
Details real-time waveforms of flow/pressure and display of measured values.
Step-by-step guide for inserting, swiveling, and snapping the inlet filter into place.
Instructions for plugging the power cable into the device and a socket.
Details mandatory checks before operation, including LEDs, alarms, and disconnect/apnoea alarms.
Instructions to press the mode button and confirm selection with the rotary knob.
Explains volume-controlled ventilation with spontaneous breathing and its patient suitability.
Discusses mask ventilation, warnings about mask types, CO2 re-breathing, and patient instructions.
Steps to press »Select Menu«, then »Alarms« to set limits for Paw, MV, f, Tapn, Tdisconn.
Describes alarm display, priority levels, background colors, and LED indications.
Provides a table of common error messages, their causes, and remedies.
Emphasizes hospital hygiene rules and precautions for handling disinfectants and preventing contamination.
Lists intervals for inlet filter, battery, blower, and device inspection by technicians.
Covers alarm limits and setting ranges for MV, Paw, Tdisconn, and breathing frequency.
Details RF and harmonic emissions compliance and the intended electromagnetic environment.
Explains VC-SIMV as a hybrid ventilation mode and its synchronization mechanism.
Explains AutoFlow's role in automatically adjusting inspiration flow based on lung conditions and patient demand.
To Next Page
