Siemens MOBILETT XP - User Manual

SP
Instructions for use
MOBILETT XP / XP ECO / XP Hybrid
The New Dimension in Mobile X-ray Imaging

Siemens MOBILETT XP Specifications

General

Type	Mobile X-ray System
kV Range	40-125 kV
Focal Spot Size	1.2 mm
Image Receptor Compatibility	CR cassettes, DR panels
Applications	General radiography, bedside imaging

Summary

Safety Information and Guidelines

General Safety Information

Covers operator manual details, validity, and general safety guidelines for the equipment.

Warning and Caution Definitions

Defines warning and caution symbols and their implications to ensure safe operation.

Maintenance and Checks

Outlines periodic maintenance, daily checks, and tests for system reliability and safety.

Installation and Emergency Procedures

Covers protective conductor installation, emergency shutdown, and fire safety measures.

Personal Protection and Radiation Safety

Details mechanical safety, hazard areas, arm system, and radiation protection for operators.

Equipment Safety and Handling

Covers installation, repair, accessories, explosion protection, transport, and disposal.

Functional Description of MOBILETT

Device Overview and Applications

General description of the MOBILETT system and its applications in healthcare settings.

Parts and Controls Identification

Identification and description of system components, controls, and their functions.

System Switches and Controls

Details main switch, mode selection, motor control, hand/parking brake, and control panel.

X-ray System Components

Describes the X-ray tube assembly, collimator, and associated parts.

Accessories and Options

Lists and describes available accessories and optional features like DAP and remote control.

Operating the MOBILETT System

Preparation and System Startup

Guides for initial setup, battery charging, and powering on the system.

Positioning and Radiation Field Adjustment

Guides for positioning the unit, adjusting the radiation field, and using collimation tools.

Setting Exposure Parameters

Explains how to set kV and mAs values for optimal imaging.

Exposure Release Mechanisms

Details using the wired release switch and the optional IR remote control for exposures.

DAP System Operation

Instructions for operating the Dose Area Product (DAP) measuring system.

Unit Transport and Shutdown

Procedures for safely switching off the unit and managing power connections.

System Messages and Troubleshooting

System Message Handling

How to acknowledge system messages and handle common error indicators.

Radiation Calculation and Dose Estimation

Dose Area Product (DAP) Calculation

Explains DAP measurement and calculation using formulas and diagrams.

Radiation Dose Estimation

Details how to estimate absorbed radiation dose using formulas and charts.

The Exposure Point System

Density and Contrast Adjustment

Explains how the exposure point system affects film density and contrast.

Functional and Safety Checks

Routine Checks and Maintenance Schedules

Outlines daily, monthly, and annual checks for system safety and performance.

Cleaning and Disinfection Procedures

Equipment Cleaning Guidelines

Provides instructions for safe cleaning of the equipment using approved methods.

Disinfection Methods and Agents

Recommends appropriate disinfectants and methods for use on the equipment.

Technical Data and Specifications

X-ray System Specifications

Technical details of the X-ray controls, generator, and tube.

Mobile Drive and Battery Systems

Specifications for the motordrive and battery systems of the MOBILETT XP Hybrid.

Optional Equipment and Environmental Data

Details on DAP equipment, environmental conditions, and parts subject to wear.

EMC and Safety Compliance

Electromagnetic compatibility guidelines and safety compliance information.

Dosimetry Information

Exposure Tables and Standard Values

Tables of recommended exposure settings (kV, mAs, SID) for various anatomical regions.

Exposure Points System Explanation

Explains the exposure points system for manipulating film density and contrast.

Equipment Labels and Markings

Label Identification and Location

Identifies permanent labels, warning symbols, and their locations on the unit.