Siemens MULTIMOBIL 10 User Manual

MULTIMOBIL 10
English
Print No.: SPR8-X01.840.10.02.02 Doc. Gen. Date: 10.05
Replaces: SPR8-X01.840.10.01.02
© Siemens AG 2003
The reproduction, transmission or
use of this document or its contents
is not permitted without express
written authority. Offenders will be
liable for damages. All rights,
including rights created by patent
grant or registration of a utility
model _or_ design,_are_ reserved.
SP
Troubleshooting Guide

Siemens MULTIMOBIL 10 Specifications

General

Brand	Siemens
Model	MULTIMOBIL 10
Category	Medical Equipment
Language	English

Summary

Service Procedures

Safety Precautions and Handling

Essential safety guidelines and ESD precautions for unit operation and servicing.

Measurement and Calibration Procedures

Detailed steps for measuring kV, mA, mAs, timing, and unit calibration.

Maintenance and Safety Checks

Guidelines for forming, cleaning, disinfecting, maintenance, and safety checks.

Servicing Modes

Instructions on using program modes 1-7 for diagnostics and adjustments.

Error Codes and Handling

Code Descriptions

Detailed explanations of initialization, standby, and exposure error codes.

Troubleshooting Flowcharts

Flowcharts for handling specific codes like Unit Not Switching On and No Radiography.

Troubleshooting Specific Issues

Component Removal

Procedures for removing the top panel, front cover, and X-ray source assembly.

Electrical System Checks

Procedures for checking line voltage, fuses, LEDs, and control voltages.

Inverter, Filament, and kV/mA Checks

Procedures for checking inverter frequency, filament current, kV, and tube current.

mAs Adjustment and Collimator Alignment

Steps for adjusting mAs and aligning the collimator light field.

Component Replacement

Procedures for replacing single tank, collimator, and its lamp.