Siemens MAMMOMAT 3000 - User Manual

States the purpose of this modification to enable centering of the radiation field.

Lists the necessary standard assembly tools and specific equipment for the modification.

Details the components of the upgrade kit, including part numbers and quantities.

Instructions for attaching tape and washers to the object table for radiation field registration.

A table to record measured distances related to the radiation field registration process.

Steps to install the measuring tools, clamps, and wedges onto the collimator holder.

Procedure for removing the collimator protective cover and preparing holes for modification.

Details on drilling holes, vacuum cleaning, and reassembling the collimator with new screws and cable ties.

Steps to adjust the collimator position and compare film results after the modification.