Siemens MAMMOMAT 3000 - Prerequisites for Collimator Holder Modification; Foreword; Tools Required for Modification; Parts Included in Upgrade Kit

Siemens-Elema AB SRX-MK RX B7-230.092.01.01.02 MAMMOMAT 3000
Solna, Sweden REV.01 10.95 Collimator holder
Prerequisites 1-1
Foreword
The purpose of this modification is to enable centering of the radiation field.
Tools required
• Standard assembly tools
• Electric drilling machine with Ø 6.8 mm drill
• Tape
• 4 Washers
Parts included
The upgrade kit, part no. 63 82 866, includes the following parts:
Nr Qty Part Part No.
1 1 Measuring tool 63 69 834
2 1 Measuring tool 63 69 842
3 2 Wedge 63 69 867
4 2 Clamp 63 82 563
5 2 Screw 60 32 320
6 4 Screw 60 23 469
7 4 Washer 60 56 535
8 8 Cable tie 90 11 370
9 5 Cable tie 62 21 753
10 2 Plastic bag 62 86 319