Safety
MOBILETT
SPR8-230.621.01.03.02 15
of 106
Original accessories
To ensure product safety, use only original Siemens accessories or accessories
approved by Siemens that comply with standards and statutory regulations (IEC/
EN 60 601-1 resp. IEC/EN 60 601-1-1).
The operator is responsible for any damages caused when accessories not
approved by Siemens are used.
Explosion Protection
The MOBILETT is not intended for operation in areas prone to explosion.
Transport
Prior to Transport Before transporting the unit, ensure that:
❏ The arm system is lowered and secured by the transport safeguard.
❏ The power cable is disconnected from the wall outlet and wound into the
cable winder.
❏ The parking brake is released.
Warning Label Trans-
port
Do not use the MOBILETT to open doors. During transport, avoid bumping the
wheels or the tube assembly into sharp edges/corners.
Damage to the accessories.
◆ Turn the MOBILETT around and move it backwards through doors and narrow
rooms.
◆ Always be careful during transport of the unit, especially in the vicinity of the
patient.
Contact Siemens customer service for more information.
MOB00013
To Next Page
Loading...
Need help?
General
