Siemens MOBILETT XP User Manual

Operation
MOBILETT
SPR8-230.621.01.03.02 49
of 106
Exposure with DAP measuring system (Option)
The DAP-equipment is automatically switched on when the main switch of the
MOBILETT is switched on.
◆ Follow normal procedures to release an exposure.
– The measured DAP value will show on the DAP-display in the unit µGym
2
(Micro Gray square meter).
You must reset the DAP value prior to exposure using the Reset button. During
the reset, make sure all segments of the DAP-display light up.
For multiple exposures, the DAP value will accumulate. If DAP values for every
single exposure are wanted, reset the DAP-display by pressing the Reset button
after each exposure.
When the system is switched off, the measured value will be lost.

Siemens MOBILETT XP Specifications

General

Brand	Siemens
Model	MOBILETT XP
Category	Medical Equipment
Language	English