Operation
MOBILETT
SPR8-230.621.01.03.02 33
of 106
Operation
Quick Operational Guide for MOBILETT XP
Hybrid
Preparation
◆ Connect the power cable to a grounded wall outlet and turn the mode selec-
tion switch to mains power operation.
– The MOBILETT is mains supply operated.
or
◆ Pull out the plug, if necessary.
◆ Turn the mode selection switch to battery operation.
– The MOBILETT is battery operated.
During the use of the device for x-ray imaging no other electrical devices may be
used on the same fused power line.
When operated in battery mode, the device may not be connected to the mains.
To Next Page
Loading...
Need help?
General
