Operation
Operator Manual
SPR8-230.621.01.03.02
50 of 106
Switching off
Switching off the MOBILETT
◆ Turn the main switch to position O (OFF).
Disconnecting the power supply cable
◆ Pull the power cable out of the wall outlet (1).
◆ Hold the power supply cable in your hand (2) while gently pulling the brake
handle.
– The power cable is totally rewinded into the unit.
Switch the MOBILETT off immediately if it is no longer used.
1
2
MOB00383
Warning
Uncontrolled movements when rewinding the power cable!
Risk of injury
◆ Hold the power supply cable in your hand while gently pulling the brake
handle.
To Next Page
Loading...
Need help?
General
