Siemens SIREMOBIL Compact Service Manual

SIREMOBIL Compact
Register 5 English
Print No.: RXR2-130.061.02.03.02 Doc. Gen. Date: 10.03
Replaces: RXR2-130.061.02.02.02
© Siemens AG 1997
The reproduction, transmission or
use of this document or its contents
is not permitted without express
written authority. Offenders will be
liable for damages. All rights,
including rights created by patent
grant or registration of a utility
model _or_ design,_are_ reserved.
Serial numbers 01417 .... 01999
SP
System Manual
Service Instructions

Siemens SIREMOBIL Compact Specifications

General

Brand	Siemens
Model	SIREMOBIL Compact
Category	Medical Equipment
Language	English

Summary

Document Revision and Disclaimer

Document Revision Level

Details the revision status of the documentation and how to obtain updates.

Disclaimer

Legal notice regarding the use and service of the equipment.

Prerequisites

Required Documents and Tools

Lists essential documents and tools needed for system service.

Information and Safety Precautions

Provides document guidance, position labels, and critical safety warnings.

Measuring Equivalent Device Leakage Current

Outlines the procedure for measuring equivalent device leakage current.

Covers and Component Handling

Procedures for removing/installing covers and handling specific components like I.I. and SIREPHOS.

C-Arm Support Plate and Concluding Steps

Details on the C-arm support plate and final service steps.

Line Voltage Adjustment

Checking Line Voltage on Monitor Trolley

Steps to verify line voltage on the monitor trolley.

Checking Operating Voltages

Low Voltages

Procedure for checking low voltage levels within the system.

Image Intensifier (I.I.) Voltages

Details for checking and adjusting Image Intensifier (I.I.) voltages.

Loading Operating Software

Control Board D1, Host Software Load

Instructions for loading operating software onto Control Board D1 (Host).

Adjustments and Programs

Generator Adjustments

Procedures for kV offset and filament circuit learning program adjustments.

Dose Rate Calibration and Settings

Steps for adjusting and checking dose rate, including max skin dose rate.

Collimator, X-Iris, and Camera Rotation

Instructions for adjusting the Collimator, X-Iris, and camera rotation.

Area Dose Product Measurement Device Calibration

Procedures for calibrating and checking the area dose product measurement device.

Memoskop Configuration and Parameters

Overview and configuration of Memoskop C/C-E parameters and settings.

Replacing Boards and Components

Board Replacements (D1, D2, D3)

Instructions for replacing Control D1, Power Supply D2, and Interface D3 boards.

Component Replacements (Videomed DC, I.I. Supply)

Procedures for replacing Videomed DC and the I.I. mini voltage supply.

Image Intensifier (I.I.) and Collimator Replacement

Steps for replacing the Image Intensifier (I.I.) and Collimator.

Optics, Memoskop, and Device Replacements

Procedures for compact optics, Memoskop, Multispot 2000, and area dose product device.

Brake Force and Torque

Brake Forces Measurement

Details on measuring and checking brake forces.

Vertical Column Lubrication

Instructions for lubricating the vertical column.

Supplement: Measuring Tube Current

Tube Current Measurement Procedure

Detailed steps for measuring the tube current.

Changes to Previous Version