Need help?Do you have a question about the Siemens SOMATOM Spirit and is the answer not in the manual?
General| Type | CT Scanner |
|---|---|
| Manufacturer | Siemens |
| Detector Type | Solid-state detector |
| Gantry Aperture | 70 cm |
| Scan Field of View | Up to 50 cm |
| X-ray Tube | Rotating anode |
| Table Load Capacity | Up to 200 kg |
| Power Requirements | 50/60 Hz |
| Slice Thickness | 1 mm |
| Scan Time | 1 s |
Discusses basic safety information, including warnings and indicators.
Focuses on ensuring personal, patient, and bystander safety during operation.
Details operating conditions, site requirements, and system safety equipment.
Covers safety aspects related to software, data security, and system access.
Provides an overview of system components, including gantry, table, and console.
Describes the displays and operating elements of the scan unit (gantry).
Details the characteristics and operating elements of the patient table.
Explains the operating elements and components of the console.
Lists various accessories available for the system.
Explains how to operate the gantry, including tilting and displays.
Details table movements, preparations, and manual operation.
Covers the use of DVD drives, USB devices, and formatting procedures.
Guides on starting, shutting down, and handling exceptional situations.
Details daily checks to ensure system readiness and correct function.
Provides an overview of available positioning aids and their usage.
Offers information on patient positioning, standard and optional accessories.
Explains the importance of regular maintenance and how to contact service.
Lists suitable and unsuitable agents for cleaning and disinfecting equipment.
Provides instructions on how to clean special parts of the system.
Explains the importance of regular quality measurements and phantom usage.
Details the procedure for performing daily quality checks on the water phantom.
Covers monthly tests for characteristic values and CTDI measurements.
Describes how to use the low contrast section of the phantom set.
Checks image quality and camera settings by filming test images.
Ensures image quality and measured values lie within defined ranges.
To Next Page