Siemens SOMATOM Spirit User Manual

0.0
0.0
Switching the System On and Off Operation
D.1-24 SOMATOM Spirit 0.0
Power failure D.1
The uninterruptible power supply (UPS) takes over the power
supply of your computer system temporarily during a power fail-
ure.
D.1
However, during a power failure, the power supply of the mea-
suring system is not guaranteed.
D.1
The UPS outputs an audible alarm if the input voltage drops. D.1
Warning D.1 A message box is displayed when the public power supply fails.
As long as the UPS takes over the power supply of your com-
puter system, you have the option of completing current
actions.
D.1
If the power failure is remedied during this time, you can con-
tinue with normal operation after resetting the system.
D.1
Shutdown D.1 When the backup time (3 min) of the UPS has elapsed, shut-
down is initiated.
D.1
Restart D.1 As soon as the normal power supply is reactivated you can
restart your system.
D.1

Siemens SOMATOM Spirit Specifications

General

Type	CT Scanner
Manufacturer	Siemens
Detector Type	Solid-state detector
Gantry Aperture	70 cm
Scan Field of View	Up to 50 cm
X-ray Tube	Rotating anode
Table Load Capacity	Up to 200 kg
Power Requirements	50/60 Hz
Slice Thickness	1 mm
Scan Time	1 s