Siemens SOMATOM Spirit User Manual

0.0
04/2012 0.0
E.3-1 0.0
CHAPTER E.2
E.3
Cleaning and Disinfecting
This chapter informs you how to clean special parts of the sys-
tem.
E.3
Safety instructions E.3
E.3
Cleaning surfaces E.3 ✧ Remove residual contrast medium on the gantry or patient
table with a wet cloth (water).
Cleaning accessories
E.3 ✧ Clean accessories made of plexiglas with soap solution or
diluted cleaning liquid only.
E.3
CAUTION E.3
Cleaning of parts of the system while the system is connected to
the power supply!
E.3
Electric shock due to possible contact with line voltage. E.3
✧ Always switch the system off at the main power switch
before cleaning or disinfecting.

Siemens SOMATOM Spirit Specifications

General

Type	CT Scanner
Manufacturer	Siemens
Detector Type	Solid-state detector
Gantry Aperture	70 cm
Scan Field of View	Up to 50 cm
X-ray Tube	Rotating anode
Table Load Capacity	Up to 200 kg
Power Requirements	50/60 Hz
Slice Thickness	1 mm
Scan Time	1 s