Siemens SONOLINE G60 - User Manual

October 2002
7482255 Rev 01
Wiedergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung
ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwieder-
handlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patent-
erteilung oder GM-Eintragung vorbehalten.
Copyright  2002 Siemens Corporation.
Proprietary data, company confidential. All rights reserved.
Confié à titre de secret d´entreprise. Tous droits réservés.
Confiado como secreto industrial. Nos reservamos todos los derechos.
SONOLINE G50 and G60 S
Ultrasound Systems
Service Manual

Siemens SONOLINE G60 Specifications

General

Type	Ultrasound System
Power Requirements	100-240 VAC, 50/60 Hz
Transducer Frequency	2.0 MHz - 15.0 MHz
Imaging Modes	B-mode, M-mode, Color Doppler, Power Doppler
Weight	231 lbs
Application	General Imaging, Vascular
Frequency Range	2 - 10 MHz

Summary

Chapter 1: Introduction and System Requirements

2.0 Performance Specifications

Details the performance specifications for both the G50 and G60 S systems.

3.0 Mechanical and Electrical Specifications

Outlines the mechanical and electrical specifications for the G50 and G60 S.

Chapter 2: System Architecture

2.0 Component Locations

Shows the locations of the major components and modules of the G60 S system.

Chapter 3: Power Distribution

1.0 Power Connections

Chapter 4: Removing and Replacing Spare Parts

2.0 Removing and Installing the Monitor

5.0 Removing and Installing the DIMAQ-IP Module

Chapter 5: Installing Equipment Options

1.0 Installing the G50 DIMAQ-IP

Chapter 6: Troubleshooting

2.0 Diagnostic Messages

Lists diagnostic messages and error messages encountered during failures.

3.0 Diagnostic Indicators

Explains the function of diagnostic LEDs on the host module.

6.0 Diagnostic Flow Charts

Provides a series of flow charts for troubleshooting G50 or G60 S malfunctions.

Chapter 7: Installing the Version 1.2 Software Update on the G60 S

1.0 Installing the Version 1.2 Software Update

1.3 Installing the Version 1.2 System Software Update

Chapter 8: Software

3.0 Installing the Product Feature Keys

5.0 Service Software Operation

Describes how to use the Service Software to verify hardware and detect circuit board failures.

6.0 Service Screens and Menus

Chapter 9: Planned Maintenance

8.0 Safety Checks

Details essential safety inspection and test routines.

9.0 System Test

Outlines the procedure for performing a system operational test.

Appendix A: Installation Procedure

2.0 Installing the G50 or the G60 S

Provides instructions to install the ultrasound system at the customer site.