Siemens SONOLINE G60 User Manual

Siemens 7482255 Rev 01 Page 27 of 42
October 2002
Chapter 8 - Software
Select the Input button to enable editing of the data fields. After entering data or
editing the data fields, select the Save button to record the new data. Select the
Cancel button to display the message box shown in Figure 8-12; select the OK
button on this message box to cancel new data and to re-display the previously
existing data.
6.7 Transducer Screen
Access the Transducer screen shown in Figure 8-18 by selecting the
Transducer button located on the Main Menu screen (Figure 8-10).
The Transducer screen lists the names of available transducers by the
Transducer Name and the Transducer ID number.
Figure 8-17 System Configuration for Peripheral
Service
Home
Site
System
HW / SW
Diagnostics
Log
Service History
Backup / Restore
System Configuration - Peripheral
No. Equipment Name / Memo
Hardware
Software
Peripheral
1
2
3
4
5
6
7
8
9
10
Modem Siemens M12 28 / 2 / 2000 31 / 4 / 2001
Cancel Input Save

Siemens SONOLINE G60 Specifications

General

Type	Ultrasound System
Power Requirements	100-240 VAC, 50/60 Hz
Transducer Frequency	2.0 MHz - 15.0 MHz
Imaging Modes	B-mode, M-mode, Color Doppler, Power Doppler
Weight	231 lbs
Application	General Imaging, Vascular
Frequency Range	2 - 10 MHz