Siemens SOMATOM Spirit - Moving the Patient Table; Preparations

0.0
0.0
Operation of the Patient Table System Handling
C.2-2 SOMATOM Spirit 0.0
Preparations C.2
Clearing up patient bedding C.2 For performance reasons, please make sure that patient bed-
ding can not get caught by moving parts of the patient table.
C.2
Moving the patient table C.2
You can adjust the table height and move the table into and out
of the gantry directly on the gantry operator panel.
(→ Page B.2-4 Gantry operator panels)
C.2
B .2 C
Always ensure that the movement is not obstructed by any
objects.
C.2
Do not place any objects underneath the patient table. C.2