Siemens SOMATOM Spirit - Restart of the Application; Shutdown and Restart

0.0
0.0
Switching the System On and Off Operation
D.1-16 SOMATOM Spirit 0.0
Shutdown and restart D.1
With the second option in the End Session dialog box, you shut
down the system and restart it.
D.1
Restarting the system D.1
D.1
✧ Click on Restart System in the End Session dialog box.
D.1
✧ Confirm with Yes in the dialog box displayed.
The system is restarted. (→ Page D.1-3 Starting procedures)
D.1
Restart of the application D.1
If you want to close all applications and restart the syngo appli-
cation only, use the third option in the End Session dialog box.
D.1
Closing the applications D.1
D.1
✧ Click on Restart Application in the End Session dialog
box.
D.1
✧ Confirm with Yes in the dialog box displayed.
The applications will be terminated and syngo will be restarted
automatically.
D.1