Siemens EQ.700 classic TP Series - Technical Specifications

en Technical specifications
62
18.1 Product number (E-Nr.),
production number (FD)
and consecutive num-
bering (Z-Nr.)
You can find the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.
18.2 Warranty conditions
You can make warranty claims for
your appliance under the following
conditions.
The guarantee conditions for this ap-
pliance are as defined by our repres-
entative in the country in which it is
sold. Details regarding these condi-
tions can be obtained from the dealer
from whom the appliance was pur-
chased. The bill of sale or receipt
must be produced when making any
claim under the terms of this guaran-
tee.
Technical specifications
19 Technical specifica-
tions
Technical specifications
Facts and figures for your appliance
can be found here.
Voltage 220–
240V∼
Frequency 50Hz
Connection rating 1500W
Maximum static pump
pressure
20bar
Maximum capacity of
water tank (without fil-
ter)
1.8l
Maximum capacity of
bean container
350g
Length of the power
cable
100cm
Appliance height 38.2cm
Appliance width 24.5cm
Appliance depth 43.5cm
Weight, empty 9kg
Type of grinder Ceramic
Declaration of Conformity
20 Declaration of Con-
formity
Declaration of Conformity
BSH Hausgeräte GmbH hereby de-
clares that the appliance with Home
Connect functionality meets the es-
sential requirements and other relev-
ant provisions of the Directive
2014/53/EU.
A detailed RED Declaration of Con-
formity can be found online at
www.siemens-home.bsh-group.com
among the additional documents on
the product page for your appliance.
2.4GHz band: 100mW max.
5GHz band: 100mW max.
BE BG CZ DK DE EE IE EL
ES FR HR IT CY LV LT LU
HU MT NL AT PL PT RO SI
SK FI SE UK NO CH TR
5GHz WLAN (Wi-Fi): For indoor use only.