en Cup heater
20
8.1 Adjusting the grinding
level
Set the desired grinding level while
the coffee beans are being ground.
WARNING
Risk of injury!
The grinder rotates.
▶ Never reach into the grinder.
ATTENTION!
Risk of damage to the grinder. The
grinder may be damaged if the grind-
ing level is not set properly.
▶ Only set the grinding level when
the grinder is running.
▶ Select the grinding level using the
rotary selector step by step.
Grinding level Setting
Fine grinding
level for lightly
roasted beans
Turn rotary se-
lector anticlock-
wise.
Coarse grind-
ing level for
dark-roasted
beans
Turn rotary se-
lector clockwise.
The grinding level setting only
takes effect after the second cup.
Tip:If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
9 Cup heater
1
You can use the cup heater to pre-
heat your cups.
9.1 Activating and deactivat-
ing the cup heater
1
WARNING
Risk of burns!
The cup heater
1
can become very
hot.
▶ Never touch the cup heater
1
while
hot.
▶ Allow the hot cup heater
1
to cool
down before touching it.
Tip:Place the cups with their base
on the cup heater to warm them to
optimum effect
1
.
▶ To activate or deactivate the cup
heater
1
, press the button.
10 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
10.1 Changing the basic set-
tings
1. Press and hold buttons and
simultaneously for at
least 3 seconds.
2. Press button re-
peatedly until the display shows
the required setting.
3. Confirm with "ok" button
.
4. Press the button to
change the setting.
1
Depending on the appliance specifications
To Next Page
Loading...
