Siemens EQ300 TF30 Series - Overview of Basic Settings; Cleaning and Servicing

Cleaning and servicing en
21
5. Confirm with "ok" button
⁠.
a The display shows "Settings
saved".
6. Press "<" button to exit
the menu.
Note:If you do not press any other
button within 90 seconds, the appli-
ance switches to the select beverage
setting without saving.
Tip:You can change the settings at
any time.
→"Basic settings", Page20
10.2 Overview of basic settings
You can find an overview of the basic settings here.
Setting Selection Description
Language See selection on the ap-
pliance
Set menu language.
Changes are immedi-
ately displayed.
Factory reset Select the required lan-
guage.
Restore settings to the
factory settings.
Note:The appliance
rinses and deletes all in-
dividual settings.
W. hardness ¡ "W. hardness" 1, 2, 3,
4
¡ Water filter
¡ H2O-Softener
Set the appliance to the
local water hardness.
Tip:Ask your local water
supplier about the water
hardness.
Note:If a water softening
system is installed in
your house, select "H2O-
Softener".
Auto Stand-by See selection on the ap-
pliance
Set how long the appli-
ance should wait after
preparing the last bever-
age before automatically
switching itself off.
Sound ¡ Sound on
¡ Sound off
Switch the tones on or
off.
11 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to
clean and maintain it carefully.