Siemens EQ300 TF30 Series - Product Number (E-Nr.) and Production Number (FD); Warranty Conditions; Technical Specifications

en Technical specifications
32
Detailed information on the warranty
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.) and the production number (FD)
of your appliance.
The contact details for Customer Ser-
vice can be found in the Customer
Service directory at the end of the
manual or on our website.
14.1 Product number (E-Nr.)
and production number
(FD)
You can find the product number (E-
Nr.) and the production number (FD)
on the appliance's rating plate.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.
14.2 Warranty conditions
The guarantee conditions for this ap-
pliance are as defined by our repres-
entative in the country in which it is
sold. Details regarding these condi-
tions can be obtained from the dealer
from whom the appliance was pur-
chased. The bill of sale or receipt
must be produced when making any
claim under the terms of this guaran-
tee.
15 Technical specifica-
tions
Voltage 220–
240V∼
Frequency 50/60Hz
Connection rating 1300W
Maximum static pump
pressure
15 bar
Maximum capacity of
water tank (without fil-
ter)
1,3l
Maximum capacity of
bean container
≈250g
Length of the power
cable
100cm
Appliance height 38,3cm
Appliance width 25,1cm
Appliance depth 43,3cm
Weight, empty ≈8-9kg
Type of grinder Ceramic/
steel