Siemens EQ500 classic connect TP516DX3 - Home Connect Settings; Data Protection

en HomeConnect
60
11.3 HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Overview of the Home Connect settings
Here you can find an overview of the HomeConnect settings and network set-
tings.
Basic setting Selection Description
Wi-Fi On
Off
Switch off the wireless module during
long absences or to save energy.
Note:In networked standby mode
your appliance requires max. 2W.
Appliance info - Display network and appliance inform-
ation
QR code - Press and follow the information on
the display.
Connect to net-
work
Connect manually
Connect automat-
ically
Reconnect the appliance to your
home network.
Disconnect from
network
- Note:You cannot operate your appli-
ance via the HomeConnect app
without a network connection.
Connecting with
app
- Connect the appliance to the
HomeConnect app or additional
HomeConnect accounts.
Remote start Switch on remote
start
Switch off remote
start
Switch remote start on the appliance
on and off.
Note:With the HomeConnect app
only switch-off is possible.
11.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).