Siemens EQ500 classic connect TP516DX3 - Basic Settings; Changing the Basic Set- Tings; Overview of the Basic Settings

Basic settings en
61
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
12 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
12.1 Changing the basic set-
tings
1.
Press ⁠.
2. Use or to select the desired
basic setting and press ⁠.
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
3. Use or to make the desired
selection and press ⁠.
a The setting is now saved.
4. Use to go back.
5. Press to exit the menu.
12.2 Overview of the basic settings
You can find an overview of the basic settings here.
Setting Selection Description
Cleaning and care Milk system
Descale
Clean
calc'nClean
Start service programme.
→"Service pro-
grammes", Page66
Cup warmer
1
Cup warmer off
2
Cup warmer on
Switch cup heater on or
off.
→"Cup heater", Page58
Water filter New filter
No filter
Set use of the water fil-
ter.
Coffee temp. normal
high
max.
Set the temperature for
coffee drinks.
Note:The setting is ef-
fective for all preparation
types.
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)