Interfaces, Displays and Operator Controls
Industrial Ethernet OSM/ESM
60
C79000-Z8976-C068-10
4.2.4 Operator Controls
4.2.4.1 Two-Pin DIP Switch
With the two-pin DIP switches on the upper casing of the OSM/ESM you can do
the following:
• With the Stby button, you can toggle the standby function on and off.
This switch has no function on the OSM TP22 and ESM TP40.
• With the RM switch, you can activate the redundancy manager function.
Stby
RM
off on
Figure 26: DIP Switches
Note
Please restart the device after changing DIP switch settings. The switch setting is
adopted only when the device starts up.
To Next Page
Loading...
