Siemens FC362-ZZ - Relay

Installation
Relay
6
A6V10421795_en--_k
43 | 151
6.9 Relay
The panel mainboard has three relay outputs used for controlling without line
monitoring.
They can be freely configured as:
● Fire Control
● RT Fire
● RT Fault
● Fire alarm
The default settings are:
● Relay 1: RT Fire
● Relay 2: RT Fault
● Relay 3: Fire alarm
Technical:
Current of each relay: max. 2 A @ DC 60 V
Fig. 13: Connection of relays
Default relay configuration of activating 'RT Fire' and 'RT Fault' outputs can be
found in task card 'Other settings' in 'FC360 Panel Configurator'.