Siemens FC362-ZZ - 22 Appendix H: Switch Mains to AC 115 V

Appendix H: Switch mains to AC 115 V
22
146 | 151
A6V10421795_en--_k
22 Appendix H: Switch mains to AC 115 V
1. Remove power supply FP2015-A1 from the panel and open it.
2. Move the jumper from X12 to X11 on the PCB board.
3. Mark '115 V' with 'x' and '230 V' with '-------' on the label indicated as below.
Jumper X12
for AC 230 V
Jumper X11
for AC 115 V