Need help?Do you have a question about the Siemens FC924 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | FC924 |
| Category | Control Panel |
| Language | English |
Details crucial safety notices, symbols, signal words, and measures to prevent injury and damage during product operation.
Outlines national standards, regulations, and legislation for product operation, emphasizing electrical installation safety.
Lists the essential hardware components required for the FS20 panel in marine installations.
Provides guidelines for selecting and applying detectors, especially smoke detectors, in marine environments to avoid misapplication.
Details considerations for spot-type detector placement and smoke detector installation, focusing on airflow and stratification.
Describes the FH2071-UM enclosure, its features, and installed equipment designed for marine applications.
Details prerequisites and steps for safe power supply installation, including wiring and connection warnings.
Provides wiring diagrams and instructions for connecting the mains cable to the FP2011-U1 power supply.
Provides instructions and notices for installing BP-62 batteries, emphasizing correct polarity and safety during connection.
Details jumper configurations, wiring specifications, and terminal blocks for power supply and battery on the periphery board.
Provides instructions for installing the periphery board onto the back box using threaded sleeves and fixing screws.
Explains connecting notification devices as class A or B circuits and setting jumpers for class A/B selection and degraded mode.
Describes relay functions (alarm, trouble, supervisory, user) and the wiring for detector circuits.
Details pin assignments for Connector X3 on the FN2001 module and provides wiring diagrams for Class A and Class B networks.
Explains jumper settings for degraded mode enable/disable and class A/B selection for NAC 2 circuits.
Describes the XCI2001-U1 releasing module for activating releasing valves in sprinkler systems.
Provides step-by-step instructions for installing the FT2015 terminal, including enclosure and back box mounting.
Provides technical data for the remote display terminal, including supply, RS-485 circuit, length, and functional data.
Guides on preparing the FS20 Marine fire panel, connecting cables, power supply, and performing initial setup.
Explains auto-configuration procedures for panels and detector circuits, with and without PC connection.
Details commissioning procedures using manual configuration for standalone and network panels.
Provides steps for adding a new panel to an existing site using manual or auto-configuration methods.
To Next Page
