FS20 Marine Fire Detection Control Panel
Siemens Industry, Inc. A6V10519176_enUS_b
Building Technologies Division
3.3 Equipment Location
When using Salt-Mist Spray approved parts, the FC922 / FC924 / FC2025 / FC2050 can be installed in
locations that require an Exceptional Degree of Protection such as those that are exposed to weather,
sea, splashing, pressure-directed liquids or similar moisture conditions, such as:
On deck
machinery spaces
cargo spaces
location within a gallery or pantry area, laundry or water closet which
contains a shower or bath
spaces with similar environment conditions
3.4 Software and Configuration
The FS20 system utilizes a complex software system that incorporates multitasking operation that allows its
microprocessors to handle many tasks in an efficient manner. This allows the panel to supervise the overall system
integrity during its normal operation to detect wiring faults, communication errors, bad initiating devices in addition to
detecting and annunciating life safety events.
Prior to its normal operation, the panels must be configured according to perform its intended tasks and must be
tested/commissioned accordingly to verify proper operation. For detailed configuration steps, please refer to FS20
Configuration manual, Document ID A6V10315023 for Desigo and Document ID A6V10333423 for Cerberus Pro.
For detailed testing and commission methods , please refer to FS20 Commissioning, Maintenance, Troubleshooting
manual, Document ID A6V10315021 for Desigo and Document ID A6V10333434 for Cerberus Pro.
To Next Page
Loading...
Need help?
General
