Siemens FC924 User Manual

FS20 Marine Fire Detection Panel Control Panel
30
Siemens Industry, Inc. A6V10519176_enUS_b
Building Technologies Division
6.2 Description
The operating unit is installed in the FCM2018-U2/U3 operating unit with control and display
elements.
Properties
 Ground fault supervision for system supply
 Integrate real time clock: Maintains the time function up to two days in the event of power failure
 Shield plate
 Interface to the periphery board
 Slot for a network module (SAFEDLINK) with full functionality
 Ethernet connection for maintenance PC
 Slots for serial options:
– RS-485 class ‘A’ module for connecting additional devices, external printer or FT2015
 Peripheral data bus connection for LED module
 Retainer for the license key
The Standard Operating Unit has the following features:
 Graphic-compatible display, 8 lines
 Buzzer
 Configurable LED indicators
 Operating buttons
 Inscription strips for sliding in
 Operation can be released with a password or key switch (optional)
Additional Functions of the FCM2019 Operating Unit (+LED):
 24-zone indicator with LEDs
 bi-colored LED per zone (red/green)
 yellow LED per zone
 indication of any events
Additional Functions of the FCM2035 Operating Unit (+LED):
 24-zone indicator with LEDs
 bi-colored LED per zone (red/yellow)
 yellow LED per zone
 indication of any events
Document References
The templates for the inscription strips and the operating instructions with button and LED
designations are located in the Appendix on page 136.
For further information about the LED Module, refer to the chapter 'LED Module [➙76]'.

Siemens FC924 Specifications

General

Brand	Siemens
Model	FC924
Category	Control Panel
Language	English