Siemens FDT241 - Base Attachment Humid FDB293

4BMounting / Installation
39BBase attachment humid FDB293
5
84
| 138
Building Technologies
007004_t_en_--
Fire Safety
2015-11-04
5.9 Base attachment humid FDB293
● For mounting in wet rooms, the base attachment humid FDB293 is used.
● To seal the cables, especially tight metal cable glands M20 x 1.5 are used.
Figure 4: Mounting of detector base on base attachment humid FDB293
1 Base attachment humid 2 Detector base acc. to
'Accessories' chapter
See also
 Base attachment humid FDB293 [➙ 49]