Need help?Do you have a question about the Siemens FDUZ221 and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Voltage | 24 VDC |
| Protection Class | II |
| Operating Temperature | -25 °C to +70 °C |
| Storage Temperature | -40 °C to +85 °C |
| Cooling | Convection |
| Category | Adapter |
| Housing Material | Plastic |
| Protection Features | Overload Protection, Overvoltage Protection, Short Circuit Protection |
| Safety Standards | IEC 60950-1 |
| EMC Standards | EN 55032, EN 61000-3-2, EN 61000-3-3 |
| Connection | Terminal block |
Defines the FDUZ221 MCL USB adapter as an interface converter for USB to MC link for connecting FD20 devices.
Lists the included items: FDUZ221 adapter, MC link cable, USB cable, and driver CD.
Emphasizes professional cable connection and use only with Siemens FD20 devices with MC link.
Explains the components and connections depicted in Figure 1, showing the adapter and system setup.
Details the parts illustrated in Figure 2, including adapter connections and cables.
Provides instructions for installing the USB driver from the supplied CD for system recognition.
Outlines steps for connecting the PC and adapter for firmware updates, including COM port configuration.
To Next Page