To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC 6ES7 972-0CB20-0XA0 and is the answer not in the manual?
General| Model | 6ES7 972-0CB20-0XA0 |
|---|---|
| Manufacturer | Siemens |
| Series | SIMATIC |
| Interface | RS485 |
| Compatibility | PROFIBUS DP |
| Voltage Supply | 24 V DC |
| Degree and class of protection | IP20 |
| Transfer rate | 9.6 kbps to 12 Mbps |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to 70°C |
| Ambient temperature during operation | 0°C to 60°C |
Explains how the PC Adapter USB connects a PC to the MPI/DP interface of an S7/M7/C7 system via a USB port.
Details the supported baud rates and network types for the PC Adapter USB, including other features.
Lists the required operating systems and SIMATIC software packages for the PC Adapter USB.
Specifies the necessary PC hardware components, including USB interface and CD ROM drive.
Illustrates and describes the physical connections available on the PC Adapter USB.
Explains the meaning and color of the USB, POWER, and MPI LEDs on the PC Adapter USB.
Details the power requirements and supply method for the PC Adapter USB, including voltage and cable type.
Provides connector pin assignment and signal descriptions for the MPI/DP interface.
Outlines the interface pin assignments and signal descriptions for the USB connection.
Highlights safety guidelines, qualified personnel requirements, and proper usage for the device.
Provides step-by-step instructions for installing the SIMATIC software for the PC Adapter USB.
Guides users on configuring the PG/PC interface settings for communication with the PC Adapter USB.
Details how to connect the PC Adapter USB to the PC and the automation system.
Provides general information on MPI/DP network capabilities, node limits, and data transmission rates.
Illustrates the connection setup for using the PC Adapter USB as a stand-alone system with two network nodes.
Shows the connection diagram for using the PC Adapter USB within an S7 system network with multiple nodes.
Details compliance with EC directives like EMC and lists relevant standards and declarations.
Outlines product approvals and compliance markings for the USA, Canada, and Australia.
