Building Technologies 74 319 0617 0 a 17.04.2008 27/180
en
Setting elements
1
10
2
3
11
6
4
5
7
8
9
12
13
2540Z03
1 Operating mode buttons (selected button is lit)
2 Display (LCD)
3 Buttons for operating the display:
Prog = selection of operating line
– + = adjustment of displayed value
4 Button for “Close heating circuit mixing valve” or burner stage 2 ON/OFF in manual operation
5 Button for “Open heating circuit mixing valve” in manual operation
6 Button for manual operation
7 LEDs for:
Manual operation
/ Heating circuit mixing valve opens / burner stage 1 ON
/ Heating circuit mixing valve closes / burner stage 2 ON
Pump runs
8 Sealing facility in the cover
9 Info button for the display of actual values
10 Setting slider for flow temperature setpoint at an outside temperature of –5 °C
11 Setting slider for flow temperature setpoint at an outside temperature of 15 °C
12 Setting knob for readjustment of room temperature
13 Fixing screw with sealing facility
To Next Page
Loading...
