150
Using the USB port
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008
Schablone 2005_07_27
ì If you do not wish to install a printer until later, click Cancel.
Installing a printer on the TCP/IP port retrospectively
If you connect a printer to this port at a later stage, start the installation procedure for
the printer port as above.
ì In this case, however, you should click the selection menu in the Select a Printer
Port window.
ì From the list, select the connection you have set up:
e.g. Gigaset_port (Standard TCP/IP port).
ì Click Next and finish installing the printer driver as instructed in the windows that
follow.
Note:
The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does
not evaluate any of the printer's response messages. For this reason please make sure
that your printer is also only configured uni-directionally. You can configure the rele-
vant settings for your printer by choosing Start – Settings – Printers.
To Next Page
Loading...
