115
Configuring Advanced Settings
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008
Schablone 2005_07_27
ì Enter the name in the Specified user field. Define different user names for the dif-
ferent access type and directory.
ì Enter the password for the user and confirm it by entering it again in the field below.
The password is case-sensitive. Avoid using proper names and obvious terms.
Instead, use upper case and lower case letters, numbers and special characters.
ì Click OK to apply the changes.
Print Server
Your device's integrated print server allows you to provide a USB printer for all users in
the local network.
If you wish to use this function, you must first connect a USB printer to your device's USB
port. The device must be shown in the screen. You can check the status of the connec-
tion to the USB device on the Advanced Settings – USB screen.
ì In the Advanced Settings menu, select: USB – Print Server
Notes:
u The Windows Vista, Windows XP or Windows 2000 operating system is a prereq-
uisite for using the print server.
u Only printer functionality is supported in the case of multifunction devices (com-
bination of printer, scanner or fax). You can obtain additional information by con-
tacting the hotline or else on the Internet (address see Quick Start Guide).
To Next Page
Loading...
