Siemens Gigaset 4015 - Connecting the Base Station to a PABX; Dialling Mode and Flash Time Settings

57
Press keys:
Connecting the base station to a PABX
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619
anlagen.fm
17.09.01
Connecting the base station to
a PABX
Dialling mode and flash time
Step 1: Changing the dialling mode
It is necessary to change the dialling mode only if your
PABX does not operate with the preset tone dialling
(
DTMF
- d
ual-
t
one
m
ultifrequency.
Please refer to the
operating instructions of your PABX.
Options:
– Tone dialling (DTMF),
–
D
ial
p
ulsing (DP). (country-specific)
– DTMF-Earth
*
OOOOOOOOOOOO
MENU
Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO

BASE SET

Select the menu item and confirm.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO

ADD FEATURES

Select the menu item and confirm.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
DIAL MODE

Confirm.
OOOOOOO OOOOOOO

Select the required dialling mode and confirm.
Step 2: Setting the flash time:
Prerequisite:
Your PABX requires a flash time different to the preset
flash time,
Please refer to the operating instruc-
tions of your PABX
.
OOOOOOOOOOOO
MENU
Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO

BASE SET

Select the menu item and confirm.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO

ADD FEATURES

Select the menu item and confirm.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO

TBR

Select the menu item and confirm.
OOOOOOO OOOOOOO

Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.
* country-specific

The current setting is marked with
'
.