Siemens Gigaset 4015 - Page 64

60
Appendix
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619
anha.fm
17.09.01
The ringer/dialling
tone cannot be
heard.
You have changed
the telephone cord
on your Gigaset.
Ensure, when purchasing
a new cord, that it has
the correct pin assign-
men (see page 6).
Error beep is
generated
(descending tone
sequence)
Wrong input Repeat the procedure;
note the display and, if
necessary, refer to the
operating instructions.
The answering ma-
chine announces
“PIN is incorrect”
during remote
operation.
The system PIN
entered is incorrect.
Re-enter the system PIN
(see page 53).
The answering
machine does not
record any mes-
sages, announce-
ments or infotexts
Memory is full Delete old messages
Play back and delete
new messages (see
page 36).
An answering
machine message
does not have a
time stamp
The date/time not
set
Set the date/time (see
page 9).
Fault Possible cause Solution