22
Handset settings
Gigaset C 450 / en-AUS / A31008-M1706-C401-1-7619 / settings_bs_hs_pabx.fm / 8.8.06
Handset settings
Your handset is preconfigured, but you can
change these settings to suit your individual
requirements.
Changing the display language
You can view the display texts in different lan-
guages.
§Menu§ ¢ Settings ¢ Handset ¢ Language
The current language is indicated by
‰.
q Select a language and press §OK§.
a Press and hold (idle status).
If you accidentally choose a language you do
not understand:
§Menu§ 422
Press keys one after the other.
q Select the correct language and
press
§OK§.
Setting the display
You have a choice of four colour schemes and
several different contrasts. You can also set a
screensaver and the illumination.
§Menu§ ¢ Settings ¢ Handset ¢ Display
You have the following options:
Screensaver
There are four different screensavers and
the settings No Screensaver or Digital Clock.
Colour Scheme
Four colour schemes. When the illumination
is switched off the display is shown in black
and white regardless of the selected setting.
Contrast
Backlight
In Charger / Without Charger. Determines
whether the illumination stays on perma-
nently or is switched off after a certain time
(
‰ = permanently switched on).
Activating/deactivating auto
answer
When this function is activated, when a call
arrives you can simply lift the handset out of
the base without having to press the talk key
c.
§Menu§ ¢ Settings ¢ Handset
Auto Answer Select and press
§OK§ (‰ =on).
a Press and hold (idle status).
Adjusting the loudspeaker volume
You can set the loudspeaker volume for hands-
free talking to five different levels and the ear-
piece volume to three different levels. You can
only adjust the loudspeaker volume during a
call.
You are conducting an external call.
t Press the control key.
q Adjust the volume and press §OK§.
Changing ringtones
u Volume:
Five volume levels (1–5; e.g. volume 2 =
ˆ) and "crescendo" ring (6; volume
increases with each ring =
‰ ).
u Melody:
List of pre-loaded ringer melodies. The first
three melodies are the "classical" ring tones.
You can also set different melodies for the fol-
lowing functions:
u External Calls: For external calls
u Internal Calls: For internal calls
u Alarm Clock: For the alarm clock
Note:
Change the automatically assigned name of
the handset, before changing the display lan-
guage, e.g. from "INT1" to "Walid".
Note:
If the illumination is switched on outside the
charging cradle, the standby time for the handset
is considerably reduced!
Note:
The handsfree volume can only be adjusted when
this function is set.
To Next Page
Loading...
