Siemens Gigaset C350 - Network Services; Setting Functions for the Next Call; Setting Functions for All Further Calls; Functions During One Call

13
Network services
Gigaset C350 / GBR / A31008-M1621-L161-1-7619 / TNet_Features_SAG.fm / 19.1.05
Network services
Network services are functions offered by
your network provider and which you
must specifically request from him.
¤ Contact your network provider if you
have any problems.
Setting functions for the
next call
You have the following options:
Withhold Number
Withhold caller ID for the next call
(CLIR).
§Menu§ ¢ Select Services ¢ Withhold
Number
~ Enter a number.
c Press the talk key.
Setting functions for all
further calls
When you have completed one of the fol-
lowing procedures, a code is sent.
¤ When it has been acknowledged by the
phone network, press the end call key
a.
You can set the following select services:
Call diversion
§Menu§ ¢ Select Services ¢ For All Calls ¢
Call Divert
¢ All Calls / No Answer /
When Busy
Select On / Off and press
§OK§
to activate or deactivate call
diversion.
~ Enter the number and
press
§OK§.
Activating/deactivating call waiting
(external call only):
§Menu§ ¢ Select Services ¢ For All Calls
¢ Call Waiting
Select On / Off and press
§OK§
to activate or deactivate call
waiting.
Functions during one call
Initiate ringback
You hear the busy tone.
§Menu§ ¢ Ringback
a Press the end call key.
Consultation
During a call:
§Menu§ ¢ External Call
~ Enter number and press §OK§.
You have the following options:
u Toggling:
¤ Use q to toggle between the par-
ties.
– End call with active party: §Menu§ End
Active Call.
Accept call waiting
§Menu§ ¢ Accept Call Waiting
You have a choice between toggling the
call or a conference call.
Call transfer
While consulting or toggling:
§Menu§ ¢ Call Transfer
Functions after one call
Cancel ringback
§Menu§ ¢ Select Services ¢ Cancel
Ringback
Note:
With CLIP, a waiting call is only indicated by a
signal tone.