Siemens Gigaset C350 - Barging-In to an External Call; Changing the Name of a Handset

29
Using several handsets
Gigaset C350 / GBR / A31008-M1621-L161-1-7619 / registration.fm / 19.1.05
Accepting/rejecting call waiting
If you receive an external call while con-
ducting an internal call, you will hear the
call waiting tone (a short beep). The
caller's number will appear in the display if
Calling Line Identification is enabled.
End internal call, accept external call:
§Menu§ Press the control key.
s Select Accept Call Waiting and
press
§OK§.
The internal call is ended. You are con-
nected to the external caller.
Rejecting an external call
§Menu§ Press the control key.
s Select Reject Call Waiting and
press
§OK§.
The call waiting tone is turned off. You
remain connected with the internal party.
The ring tone can still be heard on other
registered handsets.
Barging-in to an external call
You are conducting an external call. An
internal party can 'barge in' to this call and
take part in the conversation. All the par-
ties are made aware of the ‘barge-in’ by a
signal tone.
Requirement: The Listening in function is
activated.
Activating/deactivating internal barge-
in
Menu§ ¢ Settings ¢ Base ¢ Additional
Features
¢ Listening in
a Press and hold (idle status).
Internal barge-in
The line is busy with an external call. You
see a message to this effect on your dis-
play, and you want to barge in on the
external call.
c Press and hold the talk key.
You are linked into the call. Everyone
hears a signal tone.
Ending barge-in
a Press the end call key.
Everyone hears a signal tone.
If the first internal user presses his end call
key a, the other handset that has barged
in and the outside caller remain con-
nected.
Changing the name of a handset
Handsets are automatically given the
names "INT 1", "INT 2" etc. when they are
registered. You can change these names.
The name can be up to 10 characters long.
The changed name is displayed in the list
of every handset.
INT Open list of internal users.
s Select handset.
§Menu§ Press the control key.
s Select Change Handset.
~ Enter the name.
§OK§ Press the control key.