Siemens Gigaset C590 IP - Page 127

126
Using a handset as a room monitor
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / add_features.fm / 22.12.10
Version 4, 16.09.2005
Deactivating the room monitor remotely
Prerequisites:
u The telephone must support tone dialling
u The room monitor call is diverted to an external destination number.
u If room monitor is activated via a VoIP connection, the DTMF signalling must be
done via SIP info or RFC2833 (
¢ page 176).
¤ Accept the call from the room monitor and press keys 9 ;.
The room monitor function will deactivate after the call ends. There are no further
room monitor calls. The other room monitor settings on the handset (e.g., no ring-
tone) remain activated until you press the display key
§OFF§ on the handset.
To reactivate the room monitor function with the same phone number:
¤ Reactivate and save with §Save§ (¢ page 125).