Siemens Gigaset C590 IP - Date;Time; Connecting the Headset to the Handset (Optional)

37
First steps
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / starting.fm / 22.12.10
Version 4, 16.09.2005
Displays
u Reception between the base and the handset:
– Good to poor: Ð i Ñ Ò
–No reception: ¼ (red)
Green: Eco Mode activated
u Charge status of the batteries:
– yy{{ (empty to full)
– y flashes red: batteries almost empty
– xyx{x{ (charging)
u INT 1
Internal name of the handset
Date/time
There are two methods of setting the date and time:
u By default, your phone is configured so that the date and time are transferred
from a time server on the Internet, provided it is connected to the Internet.
You can activate/deactivate the synchronisation with a time server via the
Web configurator (
¢ page 178).
u You can also set the date and time manually via the menu of one of the regis-
tered handsets (
¢ page 144).
To ensure you have the correct time for incoming calls and to use the alarm clock,
the date and time must be set.
Connecting the headset to the handset (optional)
You can connect a headset with 2.5 mm jack connectors.
See the relevant product page for information on recom-
mended headsets
www.gigaset.com/customercare
.
Please note
To protect your phone and its system settings from unauthorised access, please
define a 4-digit number code (system PIN) known only to yourself. This code
must be entered before you can register/de-register handsets or alter your
phone's VoIP or LAN settings.
The default system PIN is 0000 (4 x zero).
For instructions on changing the PIN,
¢ page 144.
i V
07:15
INT 1 14 Oct
Calls SMS