Siemens Gigaset C590 IP - Activating;Deactivating the Handset; Activating;Deactivating the Keypad Lock

43
Using the phone
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / starting.fm / 22.12.10
Version 4, 16.09.2005
Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤ Press and hold the end call key a.
Or:
¤ Do not press any key: After 2 minutes the display will automatically revert to idle
status.
Settings that have not been saved by selecting the display keys
§OK§, §Yes§, §Save§ or
§Change§ are lost.
An example of the display in idle status is shown on page 37.
Activating/deactivating the handset
a With the phone in idle status, press and hold the end call key
(confirmation tone) to deactivate the handset.
Press and hold the end call key again to reactivate the handset.
Activating/deactivating the keypad lock
The keypad lock prevents any unwanted use of the phone.
# Press and hold the hash key in idle status to activate or deactivate the
keypad lock. You will hear the confirmation tone.
If the keypad lock is activated, you will see a message when you press a key.
The keypad lock deactivates automatically when you receive a call. It is reactivated
when the call is finished.
Please note
When the handset is activated, an animation showing the Gigaset logo is dis-
played for several seconds.
Please note
When the keypad lock is active, you cannot call emergency numbers.