Siemens Gigaset C590 IP - Setting Pauses (Fixed Line); Switching Temporarily to Tone Dialling (DTMF)

157
Connecting the phone to a PABX
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / PABX.fm / 15.12.10
Version 4, 16.09.2005
Setting pauses (fixed line)
Changing the pause after line seizure
You can change the length of the pause that is inserted between pressing the talk
key c and sending the number.
v Open the main menu.
*#Q5#L
Press keys in sequence.
~ Enter number for the length of the pause (1 = 1 sec.; 2 =3secs;
3 =7secs) and press
§OK§.
Changing the pause after recall key
You can change the length of the pause if your PABX requires this (refer to the user
guide for your PABX).
v Open the main menu.
*#Q5#2
Press keys in sequence.
~ Enter a digit for the length of the pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
§OK§.
Changing a dialling pause (pause after access code)
v Open the main menu.
*#Q5#
Press keys in sequence.
~ Enter a digit for the length of the pause (1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
§OK§.
To insert a dialling pause: press and hold S for 2 seconds. A P appears in the dis-
play.
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a
connection (e.g., to listen to the network mailbox), you must switch to tone dialling
for the call.
Prerequisite: you are conducting a call or have already dialled an external number.
* Press the star key.
After the call ends, pulse dialling is automatically reactivated.