151
Configuring the system settings
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / settings.fm / 22.12.10
Version 4, 16.09.2005
Assigning receive connections
Prerequisite: several connections are configured for your phone.
v ¢
Ï
Settings ¢Telep hony ¢ Rec. Connections
A list of internal parties is displayed (handsets).
q Select the internal parties that should be assigned new receive connec-
tions and press the display key
§OK§.
A list of all configured connections and the Gigaset.net connection is opened. You
can select Yes or No for each connection.
r Select Ye s if you want the relevant connection to be the receive con-
nection for the internal party. Select No if it should not be the receive
connection.
s Change to the next connection.
¤ Repeat these two steps for each connection.
¤ Press the display key §Save§ to save the changes.
Please note
u If a new connection is configured, it is assigned as the receive connection to
all internal parties and Answer Machine 1.
u If a connection is not assigned as the receive connection to any internal
party, calls on this connection will not be signalled.
To Next Page
Loading...
